JSON-LD markup generated by Google Structured Data Markup Helper.

Join Our Team!

Call (520) 989-0672

Go to…

Mercury

Home / Mercury

We Service and Repair all Mercury cars

  • 2008 Mercury Mariner

    Mercury Mariner
    Mileage
    141,775
    Service Date
    10/15/2024
    Services Performed
    • TEST DRIVE VEHICLE (WHERE APPLICABLE) PULL ENGINE CODES (WHERE APPLICABLE) DIAGNOSE ROOT CAUSE OF FAILURE AND/OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS NECESSARY TO PROVIDED ESTIMATE FOR REPAIR.
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • IGNITION LOCK CYLINDER HOUSING – Remove & Replace – Steering Column Lock Module
    • ACCESS AIR FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
    • Change Motor Oil & Replace engine oil filter.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
     
    JAN K. gave our service a 5 star review on 10/15/2024

  • 2004 Mercury Grand Marquis

    Mercury Grand Marquis
    Mileage
    112,858
    Service Date
    3/9/2023
    Services Performed
    • REMOVE DOOR PANEL, INSPECT AND DIAGNOSE WINDOW MOTOR AND/OR WINDOW REGULATOR FAILURE. PROVIDE ESTIMATE FOR REPAIR
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • DOOR WINDOW MOTOR – Remove & Replace – Front,LEFT
     
    RUSTY R. gave our service a 5 star review on 3/13/2023

  • 2007 Mercury Grand Marquis

    Mercury Grand Marquis
    Mileage
    88,863
    Service Date
    1/15/2020
    Services Performed
    • BULB DIAG
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • CLEAN FUEL INJECTORS, THROTTLE BODY, AND INTAKE SYSTEM.
    • CLEAN THE MASTER CYLINDER CAP AREA AND REMOVE THE OLD FLUID FROM THE RESERVOIR. FILL WITH FRESH FLUID AND FLUSH WITH POWER BRAKE FLUSH MACHINE BY PRESSURIZING BRAKE MASTER CYLINDER AND VACUUMING OLD FLUID OUT OF EACH BRAKE BLEEDER UNTIL THE FLUID IS CLEAN
    • PCV VALVE – Remove & Replace – All Applicable Models
    • REMOVE AND REPLACE BAD BULB. CHECK OPERATION.
    • REMOVE BATTERY CABLES, WIRE BRUSH AND CLEAN CONNECTIONS AND TERMINALS. REASSEMBLE AND TORQUE TO SPEC. APPLY TERMINAL PROTECTANT.
    • Test drive vehicle, pull engine codes, diagnose root cause of failure, provide estimate for repair.
     
    JASON T. gave our service a 5 star review on 1/15/2020