TEST DRIVE VEHICLE (WHERE APPLICABLE) PULL ENGINE CODES (WHERE APPLICABLE) DIAGNOSE ROOT CAUSE OF FAILURE AND/OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS NECESSARY TO PROVIDED ESTIMATE FOR REPAIR.
CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
SHIFT CONTROL CABLE – Remove & Replace
JOHN R. gave our service a 5 star review on 10/4/2024
VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
CRADLE/FRAME ASSEMBLY – Remove & Replace – [DOES NOT include alignment.]
ENGINE OR TRANSMISSION MOUNT – Remove & Replace – Transmission Mount,Rear
PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
Road test and verify engine performance, transmission operation, and shift patterns. Service transmission which includes: draining and refilling w/correct OE compatible fluid, bring transmission to temperature and ensure correct fluid level.
SCAN ENGINE CODES
JIM S. gave our service a 5 star review on 8/11/2024
VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
ROTATE TIRES
REMOVE DAMAGED/WORN WIPER BLADES. INSTALL NEW BLADES.
REMOVE AND REPLACE BAD BULB. CHECK OPERATION.
REMOVE AND REPLACE BAD BULB. CHECK OPERATION.
Road test for power steering operation. Inspect system for leaks. Exchange fluid within the power steering lines, pump, rack and pinion, and or gear box. Install new power steering fluid.
CLEAN THE MASTER CYLINDER CAP AREA AND REMOVE THE OLD FLUID FROM THE RESERVOIR, ADD NEW FLUID AND DRAW ALL OLD BRAKE FLUID OUT OF EACH BRAKE BLEEDER UNTIL THE FLUID IS CLEAN
Road test and verify engine performance, transmission operation, and shift patterns. Service transmission which includes: exchange fluid in transmission cooler, cooler lines, valve body, and torque converter. Exchange all contaminated fluid out and replace with new OE compatible transmission fluid.
KEITH W. gave our service a 5 star review on 7/26/2024