JSON-LD markup generated by Google Structured Data Markup Helper.

Join Our Team!

CRM Mitchell1

Home / Archives for CRM Mitchell1 / Page 27

We Service and Repair all CRM Mitchell1 cars

  • 2005 Toyota Matrix

    Toyota Matrix
    Mileage
    126,251
    Service Date
    9/2/2022
    Services Performed
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • ACCESS CABIN FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
    • Remove and replace air filter. Inspect and remove any debris obstructing the air intake system.
    • ROTATE TIRES
    • DISCONNECT BATTERY HOLD DOWN AND BATTERY CABLES. REMOVE BATTERY. CLEAN CONNECTIONS IF REQUIRED. INSTALL NEW BATTERY, ATTACH CABLES, TORQUE HOLD DOWN.
     
    JENNY P. gave our service a 5 star review on 9/12/2022
  • 2011 Lexus ES 350

    Lexus ES 350
    Mileage
    138,518
    Service Date
    9/1/2022
    Services Performed
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • ACCESS AIR FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
     
    JUNE O. gave our service a 5 star review on 9/12/2022
  • 2005 Chevrolet Silverado

    Chevrolet Silverado
    Mileage
    100,827
    Service Date
    9/1/2022
    Services Performed
    • VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
    • PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • Remove cover. Remove old gasket material, drain old fluid. Inspect internals and reassemble with new gasket. Install new fluid to proper level. Road test vehicle for proper operation.
    • (Combination) – OIL SEAL WEAR SLEEVE – Replace BOTH
    • PINION SHAFT SEAL – Remove & Replace – 2500 HD Full Floating Axle
    • WHEEL SEAL – Remove & Replace – 2500 HD Full Floating Axle,Both – [Includes: Repack and adjust Bearings (where applicable).]
    • A/C COMPRESSOR DRIVE BELT – Remove & Replace – V8,Gas – [Includes: Serpentine and V-Belt type Belt(s).]
    • INSTALL NEW BRAKE PADS AND HARDWARE INCLUDING NEW ROTORS.
    • IDLER ARM – Remove & Replace – 4WD w/Skid Plate – [DOES NOT include alignment.]
    • PITMAN ARM – Remove & Replace – 2500 HD,3500,Gas,8.1L Eng,Automatic Trans – [Includes: R&I Steering Gear Assembly.] – [DOES NOT include alignment.]
    • WHEEL HUB – Remove & Replace – 2500 HD,4WD Front,Both
    • STEERING GEAR (COMPLETE) – Remove & Replace – 2500 HD,3500,8.1L Eng,Automatic Trans Worm & Ball Nut Type Gears – [Includes: Manual and Power Rack & Pinion, Worm & Ball Nut and Rack & Piston Assemblies. Adjust Toe-in on Rack & Pinion models. DOES NOT inclu
    • STEERING GEAR REBUILD
    • CLEAN FUEL INJECTORS, THROTTLE BODY, AND INTAKE SYSTEM.
    • SPARK PLUGS – Remove & Replace – V8
    • CLEAN THE MASTER CYLINDER CAP AREA AND REMOVE THE OLD FLUID FROM THE RESERVOIR. FILL WITH FRESH FLUID AND FLUSH WITH POWER BRAKE FLUSH MACHINE BY PRESSURIZING BRAKE MASTER CYLINDER AND VACUUMING OLD FLUID OUT OF EACH BRAKE BLEEDER UNTIL THE FLUID IS CLEAN
    • Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
    • Remove cover. Remove old gasket material, drain old fluid, inspect internals and reassemble with new gasket. Install new fluid to proper levels. Road test vehicle for proper operation.
    • DIFFERENTIAL LOCK ACTUATOR – Remove & Replace
    • (Additional) – DIFFERENTIAL LOCK ACTUATOR – Remove & Replace Where Skid Plate interferes add
     
    PAUL G. gave our service a 5 star review on 9/12/2022
  • 2006 Chevrolet Silverado

    Chevrolet Silverado
    Mileage
    226,866
    Service Date
    9/2/2022
    Services Performed
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • TEST DRIVE VEHICLE (WHERE APPLICABLE) PULL ENGINE CODES (WHERE APPLICABLE) DIAGNOSE ROOT CAUSE OF FAILURE AND/OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS NECESSARY TO PROVIDED ESTIMATE FOR REPAIR.
     
    BRANDON B. gave our service a 5 star review on 9/9/2022
  • 2017 Subaru Forester

    Subaru Forester
    Mileage
    62,649
    Service Date
    9/2/2022
    Services Performed
    • VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
    • CONTROL ARM – Remove & Replace – Lower,One Side – [DOES NOT include alignment.]
    • PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
    • DISCONNECT BATTERY HOLD DOWN AND BATTERY CABLES. REMOVE BATTERY. CLEAN CONNECTIONS IF REQUIRED. INSTALL NEW BATTERY, ATTACH CABLES, TORQUE HOLD DOWN.
     
    JOANN S. gave our service a 5 star review on 9/8/2022
  • 2008 Kia Sportage

    Kia Sportage
    Mileage
    112,403
    Service Date
    9/2/2022
    Services Performed
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( %) Rear ( %)
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • A/C COMPRESSOR – Remove & Replace – V6 – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • CONDENSER – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • EVAPORATOR EXPANSION VALVE – Remove & Replace – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
    • REMOVE AND STORE REFRIGERANT, EVACUATE SYSTEM AND ADD PROPER AMOUNT OF LUBRICANT AND REFRIGERANT. RECLAIM REFRIGERANT PRIOR TO SYSTEM SERVICE. DRAW VACUUM, CHECK FOR LEAKS. RECHARGE WITH PROPER AMOUNT OF LUBRICANT AND REFRIGERANT. NO WARRANTY ON A/C EVACUATE AND RECHARGE, NO WARRANTY ON FREON.
    • REPLACE BOTH SCHRADER VALVES
    • BRAKE SHOES &/OR PADS – Remove & Replace – Front,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable).
    • BRAKE SHOES &/OR PADS – Remove & Replace – Rear,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable).
    • ACCESS AIR FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
     
    ALAN V. gave our service a 5 star review on 9/8/2022
  • 2007 Ford Econoline

    Ford Econoline
    Mileage
    43,857
    Service Date
    8/31/2022
    Services Performed
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • ACCESS AIR FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
     
    This vehicle's owner gave our service a 5 star review on 8/31/2022
  • 2009 Toyota RAV4

    Toyota RAV4
    Mileage
    172,152
    Service Date
    8/30/2022
    Services Performed
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • ACCESS CABIN FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
    • DISCONNECT BATTERY HOLD DOWN AND BATTERY CABLES. REMOVE BATTERY. CLEAN CONNECTIONS IF REQUIRED. INSTALL NEW BATTERY, ATTACH CABLES, TORQUE HOLD DOWN.
     
    ABBY M. gave our service a 5 star review on 8/30/2022
  • 2021 Kia Rio

    Kia Rio
    Mileage
    10,921
    Service Date
    8/8/2022
    Services Performed
    • CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
     
    ROBERT B. gave our service a 5 star review on 8/15/2022
  • 2017 Hyundai Tucson

    Hyundai Tucson
    Mileage
    52,455
    Service Date
    8/3/2022
    Services Performed
    • VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
    • TIRE ROTATION
    • Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
    • RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
    • REPAIR WELD ON AUX WATER PUMP BRACKET
    • AXLE SHAFT – Remove & Replace – Right – [NOTE: For Independent Suspension Type Axles, this operation consists of removal and installation, dissassembly and reassembly of the Axle Shaft Assembly and replacement of the Axle Shaft.]
    • PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
    • CLEAN FUEL INJECTORS, THROTTLE BODY, AND INTAKE SYSTEM.
     
    PHIL R. gave our service a 5 star review on 8/15/2022