2010 Toyota Tacoma
Mileage
168,787
Service Date
4/20/2021
Services Performed
- ALTERNATOR DRIVE BELT – Remove & Replace – Base,V6
- Change Motor Oil & Replace oil Filter, Lube Chassis if applicable.
- CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
- EXTRACT STRIPPED PLUGS ON FRONT DIFF
- PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
- REMOVE BATTERY CABLES, WIRE BRUSH AND CLEAN CONNECTIONS AND TERMINALS. REASSEMBLE AND TORQUE TO SPEC. APPLY TERMINAL PROTECTANT.
- Remove cover. Remove old gasket material, drain old fluid, inspect internals and reassemble with new gasket. Install new fluid to proper levels. Road test vehicle for proper operation.
- Remove cover. Remove old gasket material, drain old fluid. Inspect internals and reassemble with new gasket. Install new fluid to proper level. Road test vehicle for proper operation.
- ROTATE TIRES
- Serviced as requested.
- WHEEL HUB – Remove & Replace – Base,4WD Front,One Side – LEFT[DOES NOT include wheel alignment.] – [Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).]
LESLIE O. gave our service a 5 star review on 4/21/2021
