2012 Toyota RAV4
Mileage
126,676
Service Date
1/2/2026
Services Performed
- TEST DRIVE VEHICLE (WHERE APPLICABLE) PULL ENGINE CODES (WHERE APPLICABLE) DIAGNOSE ROOT CAUSE OF FAILURE AND/OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS NECESSARY TO PROVIDED ESTIMATE FOR REPAIR.
- CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
- DISCONNECT BATTERY HOLD DOWN AND BATTERY CABLES. REMOVE BATTERY. INSTALL NEW BATTERY, ATTACH CABLES, TORQUE HOLD DOWN.
- REMOVE BATTERY CABLES, WIRE BRUSH AND CLEAN CONNECTIONS AND TERMINALS. REASSEMBLE AND TORQUE TO SPEC. APPLY TERMINAL PROTECTOR TO HELP MAINTAIN MAXIMUM BATTERY PERFORMANCE AND PREVENT CORROSION.
- ACCESS CABIN FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
- INSTALL PROPER DYE. ALLOW VEHICLE TO RUN. CHECK FOR ACTUAL SOURCE OF LEAKAGE.
- Remove differential fluid & Install new fluid to proper level. Road test vehicle for proper operation and inspect for any leaks
- SERVICE TRANSFER CASE PER OEM REQUIREMENTS
- This process removes heavy carbon deposits from the backs of intake valves and combustion chambers.
- Inspect hoses and clamps. Pressure test cooling system. Exchange coolant from engine, radiator, and heater core. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
- CLEAN THE MASTER CYLINDER CAP AREA AND REMOVE THE OLD FLUID FROM THE RESERVOIR, ADD NEW FLUID AND DRAW ALL OLD BRAKE FLUID OUT OF EACH BRAKE BLEEDER UNTIL THE FLUID IS CLEAN
LINDA L. gave our service a 5 star review on 1/2/2026
