2010 Volkswagen New Beetle
Mileage
139,864
Service Date
5/6/2025
Services Performed
- TEST DRIVE VEHICLE ( WHERE APPLICABLE ) PULL ENGINE CODES ( WHERE APPLICABLE ) DIAGNOSE ROOT CAUSE OF FAILURE AND / OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS IS NECESSARY TO PROVIDE ESTIMATE FOR REPAIR
- CHECK UNDER HOOD FLUID LEVELS AND CONDITION. CHECK ALL EXTERIOR LIGHTS. CHECK BELTS AND HOSES. CHECK TIRES FOR PRESSURE AND WEAR.
- REMOVE DAMAGED/WORN WIPER BLADES. INSTALL NEW BLADES.
- COOLANT PRESSURE CHECK, PROVIDE ESTIMATE ON REPAIR OR PROVIDE ESTIMATE FOR ADDITIONAL TEAR DOWN TO LOCATE SOURCE OF COOLANT LEAK. DOES NOT INCLUDE COOLING SYSTEM DIAGNOSTICS.
- Inspect hoses and clamps. Pressure test cooling system. Exchange coolant from engine, radiator, and heater core. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
- Road test and verify engine performance, transmission operation, and shift patterns. Service transmission which includes: exchange fluid in transmission cooler, cooler lines, valve body, and torque converter. Exchange all contaminated fluid out and replace with new OE compatible transmission fluid.
- SPARK PLUGS – Remove & Replace
- This process removes heavy carbon deposits from the backs of intake valves and combustion chambers.
- CONTROL ARM – Remove & Replace – Automatic Trans Lower,Both – [DOES NOT include alignment.]
- PLACE VEHICLE ON ALIGNMENT RACK, ATTACH EQUIPMENT, MEASURE CASTER, CAMBER AND TOE. COMPARE TO VEHICLE SPECIFICATIONS. SET AND ADJUST ALL APPROVED ALIGNMENT ANGLES WITH ALLOWABLE SPECIFICATIONS.
- AXLE SHAFT ASSEMBLY – Remove & Replace – Automatic Trans One Side,Front Axle, RIGHT – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints. DOES NOT include wheel alignment (unless noted o
- SHOCK &/OR STRUT ASSEMBLY – Remove & Replace – Both REAR – [DOES NOT include alignment.]
- HEATER HOSE ASSEMBLY – Remove & Replace – OUTLET
- HEATER HOSES – Remove & Replace – Inlet
- VACUUM PUMP – Remove & Install or Remove & Replace – Automatic Trans Brake Booster – [Includes: R&I Transaxle Assembly.]
- GLUE MOLDING THAT IS HANGING DOWN ON DRIVERS DOOR BACK INTO PLACE. IT IS HANGING DOWN. IF POSSIBLE GLUE PASSENGER SIDE ALSO.
- INTAKE MANIFOLD – Remove & Replace
- WHAT IS CAUSING MAIN OIL LEAK? OVERLAPPING LABOR WITH MANIFOLD REMOVAL?
- (Combination w/ Intake Removal) – ENGINE OIL FILTER ADAPTER – Remove & Replace
ANN N. gave our service a 5 star review on 5/6/2025
