2010 Hyundai Genesis Coupe
Mileage
149,447
Service Date
4/28/2025
Services Performed
- TEST DRIVE VEHICLE (WHERE APPLICABLE) PULL ENGINE CODES (WHERE APPLICABLE) DIAGNOSE ROOT CAUSE OF FAILURE AND/OR ADVISE OF ANY ADDITIONAL DIAGNOSTICS NECESSARY TO PROVIDED ESTIMATE FOR REPAIR.
- VISUAL INSPECTION OF ALL BELTS AND HOSES, EXHAUST SYSTEM, SUSPENSION SESTEM, SHOCKS, STRUTS, REMOVE WHEELS AND PERFORM FULL BRAKE INSPECTION, EXTERIOR LIGHTS, DRIVELINE INCLUDING AXLES AND DRIVE SHAFTS, FLUID LEVEL AND CONDITION
- MASTER CYLINDER – Remove & Replace –
- CLEAN THE MASTER CYLINDER CAP AREA AND REMOVE THE OLD FLUID FROM THE RESERVOIR, ADD NEW FLUID AND DRAW ALL OLD BRAKE FLUID OUT OF EACH BRAKE BLEEDER UNTIL THE FLUID IS CLEAN
- DISC ROTOR – Remove & Replace – Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
- DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
- Change Motor Oil & Replace engine oil filter.
- RESET MAINTENANCE/OIL CHANGE REMINDER LIGHT
- DISCONNECT BATTERY HOLD DOWN AND BATTERY CABLES. REMOVE BATTERY. INSTALL NEW BATTERY, ATTACH CABLES, TORQUE HOLD DOWN.
- REMOVE BATTERY CABLES, WIRE BRUSH AND CLEAN CONNECTIONS AND TERMINALS. REASSEMBLE AND TORQUE TO SPEC. APPLY TERMINAL PROTECTOR TO HELP MAINTAIN MAXIMUM BATTERY PERFORMANCE AND PREVENT CORROSION.
- VALVE COVER GASKET – Remove & Replace – In-Line4 2 DAYS
- BLOWER MOTOR – Remove & Clean debri
- ACCESS CABIN FILTER HOUSING REMOVE OLD AIR FILTER. CLEAN OUT HOUSING OF DEBRIS. INSTALL NEW FILTER. FASTEN HOUSING.
- SPARK PLUGS – Remove & Replace – In-Line4 All
- This process removes heavy carbon deposits from the backs of intake valves and combustion chambers.
SASSY L. gave our service a 5 star review on 4/28/2025
